Excellent electrochemical performance of LiFe0.4Mn0.6PO4 microspheres produced using a double carbon coating process

Composite LiFe0.4Mn0.6PO4/C microspheres are considered advanced cathode materials for electric vehicles and other high-energy density applications due to their advantages of high energy density and excellent cycling stability. LiFe0.4Mn0.6PO4/C microspheres have been produced using a double carbon coating process employing traditional industrial techniques (ball milling, spray-drying and annealing). The obtained LiFe0.4Mn0.6PO4 microspheres exhibit a high discharge capacity of around 166 mA h g-1 at 0.1 C and excellent rate capabilities of 132, 103, and 72 mA h g-1 at 5, 10, and 20 C, respectively. A reversible capacity of about 152 mA h g-1 after 500 cycles at a current density of 1 C indicates an outstanding cycling stability. The excellent electrochemical performance is attributed to the micrometer-sized spheres of double carbon-coated LiFe0.4Mn0.6PO4 nanoparticles with improved electric conductivity and higher Li ion diffusion coefficients, ensuring full redox reactions of all nanoparticles. The results show that the advanced high-energy density cathode materials can be produced using existing industry techniques.

Novel ultrathin nanoflake assembled porous MnO2/carbon strip microspheres for superior pseudocapacitors

A novel hierarchical MnO2/carbon strip (MnO2/C) microsphere is synthesized via galvanostatic charge-discharge of a MnO@C matrix precursor where the carbon is from a low-cost citric acid. This hierarchical structure is composed of manganese oxides nanoflakes and inlaid carbon strips. The ultrathin nanoflakes assemble to form porous microspheres with a rippled surface superstructure. Due to its improved conductivity and remarkable increased phase contact area, this novel structure exhibits an excellent electrochemical performance with a specific capacitance of 485.6 F g -1 at a current density of 0.5 A g-1 and an area capacitance as high as 4.23 F cm-2 at a mass loading of 8.7 mg cm-2. It also shows an excellent cycling stability with 88.9% capacity retention after 1000 cycles. It is speculated that the present low-cost novel hierarchical porous microspheres can serve as a promising electrode material for pseudocapacitors. © 2014 American Chemical Society.

Tunable dual-stimuli response of a microgel composite consisting of reduced graphene oxide nanoparticles and poly(N-isopropylacrylamide) hydrogel microspheres

A type of photo- and thermo-responsive composite microsphere composed of reduced graphene oxide nanoparticles and poly(N-isopropylacrylamide) (rGO@pNIPAM) is successfully fabricated by a facile solution mixing method. Due to the high optical absorbance and thermal conduction of rGO, the composite microspheres are endowed with the new property of photo-response, in addition to the intrinsic thermally sensitive property of pNIPAM. This new ability undoubtedly enlarges the scope of applications of the microgel spheres. Furthermore, through controlling the rGO content in the composite, the photo- and thermo-sensitivity of the composite can be effectively modulated. That is, with a lower rGO content (≤32% by weight), the composite microspheres perform only thermally induced changes, such as volume contraction (by ∼45% in diameter) and drug release, when crossing the lower critical solution temperature of pNIPAM. With a higher rGO content (∼47.5%), both temperature and light irradiation can trigger changes in the composite. However, when the rGO content is increased to around 64.5%, the thermo-responsivity of the composite disappears, and the spheres exhibit only photo-induced drug release. With a further increase in rGO content, the environmentally responsive ability of the microspheres vanishes. This journal is © the Partner Organisations 2014.

Encapsulation of hydrophobic phthalocyanine with poly(N-isopropylacrylamide)/lipid composite microspheres for thermo-responsive release and photodynamic therapy

Phthalocyanine (Pc) is a type of promising sensitizer molecules for photodynamic therapy (PDT), but its hydrophobicity substantially prevents its applications. In this study, we efficiently encapsulate Pc into poly(N-isopropylacrylamide) (pNIPAM) microgel particles, without or with lipid decoration (i.e., Pc@pNIPAM or Pc@pNIPAM/lipid), to improve its water solubility and prevent aggregation in aqueous medium. The incorporation of lipid molecules significantly enhances the Pc loading efficiency of pNIPAM. These Pc@pNIPAM and Pc@pNIPAM/lipid composite microspheres show thermo-triggered release of Pc and/or lipid due to the phase transition of pNIPAM. Furthermore, in the in vitro experiments, these composite particles work as drug carriers for the hydrophobic Pc to be internalized into HeLa cells. After internalization, the particles show efficient fluorescent imaging and PDT effect. Our work demonstrates promising candidates in promoting the use of hydrophobic drugs including photosensitizers in tumor therapies. © 2014 by the authors.

Self-assembled V2O5 interconnected microspheres produced in a fish-water electrolyte medium as a high-performance lithium-ion-battery cathode

Interconnected microspheres of V2O5 composed of ultra-long nanobelts are synthesized in an environmental friendly way by adopting a conventional anodization process combined with annealing. The synthesis process is simple and low-cost because it does not require any additional chemicals or reagents. Commercial fish-water is used as an electrolyte medium to anodize vanadium foil for the first time. Electron microscopy investigation reveals that each belt consists of numerous nanofibers with free space between them. Therefore, this novel nanostructure demonstrates many outstanding features during electrochemical operation. This structure prevents self-aggregation of active materials and fully utilizes the advantage of active materials by maintaining a large effective contact area between active materials, conductive additives, and electrolyte, which is a key challenge for most nanomaterials. The electrodes exhibit promising electrochemical performance with a stable discharge capacity of 227 mAh·g–1 at 1C after 200 cycles. The rate capability of the electrode is outstanding, and the obtained capacity is as high as 278 at 0.5C, 259 at 1C, 240 at 2C, 206 at 5C, and 166 mAh·g–1 at 10C. Overall, this novel structure could be one of the most favorable nanostructures of vanadium oxide-based cathodes for Li-ion batteries. [Figure not available: see fulltext.]

Monodisperse aqueous microspheres encapsulating high concentration of l-ascorbic acid: insights of preparation and stability evaluation from straight-through microchannel emulsification

Stabilization of l-ascorbic acid (⌊-AA) is a challenging task for food and pharmaceutical industries. The study was conducted to prepare monodisperse aqueous microspheres containing enhanced concentrations of ⌊-AA by using microchannel emulsification (MCE). The asymmetric straight-through microchannel (MC) array used here constitutes 11 × 104 μm microslots connected to a 10 μm circular microholes. 5-30% (w/w) ⌊-AA was added to a Milli-Q water solution containing 2% (w/w) sodium alginate and 1% (w/w) magnesium sulfate, while the continuous phase constitutes 5% (w/w) tetraglycerol condensed ricinoleate in water-saturated decane. Monodisperse aqueous microspheres with average diameters (dav) of 18.7-20.7 μm and coefficients of variation (CVs) below 6% were successfully prepared via MCE regardless of the ⌊-AA concentrations applied. The collected microspheres were physically stable in terms of their dav and CV for >10 days of storage at 40°C. The aqueous microspheres exhibited ⌊-AA encapsulation efficiency exceeding 70% during the storage.

Preparation of monodisperse aqueous microspheres containing high concentration of L-ascorbic acid by microchannel emulsification

Monodisperse aqueous microspheres containing high concentrations of l-ascorbic acid with different concentrations of sodium alginate (Na-ALG) and magnesium sulfate (MgSO4) were prepared by using microchannel emulsification (MCE). The continuous phase was water-saturated decane containing a 5% (w/w) hydrophobic emulsifier. The flow rate of the continuous phase was maintained at 10 mL h(-1), whereas the pressure applied to the disperse phase was varied between 3 and 25 kPa. The disperse phase optimized for successfully generating aqueous microspheres included 2% (w/w) Na-ALG and 1% (w/w) MgSO4. At a higher MgSO4 concentration, the generated microspheres resulted in coalescence and subsequent bursting. At a lower MgSO4 concentration, unstable and polydisperse microspheres were obtained. The aqueous microspheres generated from the MCs under optimized conditions had a mean particle diameter (dav) of 14-16 µm and a coefficient of variation (CV) of less than 8% at the disperse phase pressures of 5-15 kPa.

Dietary assimilation and the digestive strategy of the omnivorous anomuran land crab Birgus latro (Coenobitidae).

On Christmas Island, Indian Ocean, the diet of robber crabs, Birgus latro (Linnaeus) was generally high in fat, storage polysaccharides or protein and largely comprised fruits, seeds, nuts and animal material. The plant items also contained significant amounts of hemicellulose and cellulose. In laboratory feeding trials, crabs had similar intakes of dry matter when fed artificial diets high in either fat or storage polysaccharide, but intake was lower on a high protein diet. Assimilation coefficients of dry matter (69–74%), carbon (72–81%), nitrogen (76–100%), lipid (71–96%) and storage polysaccharide (89–99%) were high on all three diets. B. latro also assimilated significant amounts of the chitin ingested in the high protein diet ( 93%) and hemicellulose (49.6–65%) and cellulose (16–53%) from the high carbohydrate and high fat diets. This is consistent with the presence of chitinase, hemicellulase and cellulase enzymes in the digestive tract of B. latro. The mean retention time (27.2 h) for a dietary particle marker (⁵⁷Co-labelled microspheres) was longer than measured in leaf-eating land crabs. The feeding strategy of B. latro involves the selection of highly digestible and nutrient-rich plant and animal material and retention of the digesta for a period long enough to allow extensive exploitation of storage carbohydrates, lipids, protein and significant amounts of structural carbohydrates (hemicellulose, cellulose and chitin).

Superhydrophobic polyimide films with a hierarchical topography : combined replica molding and layer-by-layer assembly

Artificial superhydrophobic surfaces with a hierarchical topography were fabricated by using layer-by-layer assembly of polyelectrolytes and silica nanoparticles on microsphere-patterned polyimide precursor substrates followed with thermal and fluoroalkylsilane treatment. In this special hierarchical topography, micrometer-scale structures were provided by replica molding of polyamic acid using two-dimensional arrays of polystyrene latex spheres as templates, and nanosized silica particles were then assembled on these microspheres to construct finer structures at the nanoscale. Heat treatment was conducted to induce chemical cross-linking between polyelectrolytes and simultaneously convert polyamic acid to polyimide. After surface modification with fluoroalkylsilane, the as-prepared highly hydrophilic surface was endowed with superhydrophobicity due to the bioinspired combination of low surface energy materials and hierarchical surface structures. A superhydrophobic surface with a static water contact angle of 160 degrees and sliding angle of less than 10 degrees was obtained. Notably, the polyimide microspheres were integrated with the substrate and were mechanically stable. In addition, the chemical and mechanical stability of the polyelectrolyte/silica nanoparticle multilayers could be increased by heat-induced cross-linking between polyelectrolytes to form nylon-like films, as well as the formation of interfacial chemical bonds.

Dielectrophoretic manipulation and separation of microparticles using curved microelectrodes

This paper presents the development and experimental analysis of a dielectrophoresis (DEP) system, which is used for the manipulation and separation of microparticles in liquid flow. The system is composed of arrays of microelectrodes integrated to a microchannel. Novel curved microelectrodes are symmetrically placed with respect to the centre of the microchannel with a minimum gap of 40 mm. Computational fluid dynamics method is utilised to characterise the DEP field and predict the dynamics of particles. The performance of the system is assessed with microspheres of 1, 5 and 12 mm diameters. When a high-frequency potential is applied to microelectrodes a spatially varying electric field is induced in the microchannel, which creates the DEP force. Negative-DEP behaviour is observed with particles being repelled from the microelectrodes. The particles of different dimensions experience different DEP forces and thus settle to separate equilibrium zones across the microchannel. Experiments demonstrate the capability of the system as a field flow fraction tool for sorting microparticles according to their dimensions and dielectric properties.

Management of advanced neuroendocrine tumors with hepatic metastasis

Neuroendocrine tumors (NETs) in general and specifically these gastroenteropancreatic-neuroendocrine tumors often present a considerable diagnostic and therapeutic challenge, especially those that behave in an aggressive fashion. The majority of tumors are diagnosed at a stage that the only curative treatment, radical surgical intervention, is no longer an option and thus long-term therapy with somatostatin analogs is focused on symptom amelioration and in the improvement of quality of life. Although biotherapy is currently the most efficient treatment to achieve palliation, conventional chemotherapy may have some utility in undifferentiated or highly proliferating neuroendocrine carcinomas and pancreatic NETs. Hepatic metastases, depending on size, location, and number may be amenable to surgical resection or radiofrequency ablation. If surgery is not feasible, embolization either alone (bland), in combination with chemotherapeutic agents, or using radioactive microspheres can be used. Peptide receptor targeted radiotherapy using radiolabeled octapeptide analogs (⁹⁰Yttrium or ¹⁷⁷Lutetium-octreotide) may lead to reduction in tumor size, but in most circumstances has a tumor stabilizing effect. A variety of antiangiogenesis and growth factor-targeted agents have been evaluated, but to date, the results have failed to meet our expectations.

Oxygen consumption and blood flow distribution in perfused skeletal muscle of chinook salmon

An isolated, perfused salmon tail preparation showed oxyconformance at low oxygen delivery rates. Addition of pig red blood cells to the perfusing solution at a haematocrit of 5 or 10% allowed the tail tissues to oxyregulate. Below ca. 60 ml O₂ kg⁻¹ h⁻¹ of oxygen delivery (DO₂), VO₂ was delivery dependent. Above this value additional oxygen delivery did not increase VO₂ of resting muscle above ca. 35 ml O₂ kg⁻¹ h⁻¹. Following electrical stimulation, VO₂ increased to ca. 65 ml O₂ kg⁻¹ h⁻¹, with a critical DO₂ of ca. 150 ml O₂ kg⁻¹ h⁻¹. Dorsal aortic pressure fell to 69% of the pre-stimulation value after 5 min of stimulation and to 54% after 10 min. Microspheres were used to determine blood flow distribution (BFD) to red (RM) and white muscle (WM) within the perfused myotome. Mass specific BFD ratio at rest was found to be 4.03 ± 0.49 (RM:WM). After 5 min of electrical stimulation the ratio did not change. Perfusion with saline containing the tetrazolium salt 3-(4,5-Dimethyl-2-thiazolyl)-2,5-diphenyl-2H-tetrazolium bromide (MTT) revealed significantly more mitochondrial activity in RM. Formazan production from MTT was directly proportional to time of perfusion in both red and WM. The mitochondrial activity ratio (RM:WM) did not change over 90 min of perfusion.